E-Z 90-Degree Log Tenon Cutter![]() Similar to the E-Z 45° Log Tenon Cutter, the 90° also is adjustable to cut from about 1" diameter tenons up to 3" diameter tenons at the ends of logs and branches. These cutters will fit on any 1/2" drill.
The E-Z 90° cuts a flat shoulder instead of a beveled shoulder (see photos below), and uses two blades to make the cut. The blades are double-sided, so when one side gets dull, simply use the included hex key to flip them around to the sharper side. Blades are made from steel, and then the steel is hardened to provide a strong and durable blade, and keeps its sharp edge for a long time. Flat 90° tenons are ideal for applications requiring a connection to be made to flat surfaces, such as a 4x4 post, wall, stair, or the bottom of a slab table top. I use the 90 Degree arms exclusively for building stands for displays, when I don't want to see a tenon at all. Sometimes you want the log to just join up, and be solid. This is the only 90 Degree cutter I know of that can do that. I love it. You can also use it on square wood, so long as the wood is under 4.5". I haven't tried that yet, but one of my customers did, and made round tenons on 2x4's. Hey, square wood sometimes has to work with log projects. Joining it all together is what counts. The tenon can be drilled at an angle for those special jobs. The flat tenon allows for more gluing surface for a super strong joint. There are so many things you can do with the EZ-90. The E-Z 90° Log Tenon Cutter will accept a log up to about 4-1/2" diameter, and will produce a tenon up to 2" long. A 3/8" drill bit is included with your order to drill the pilot hole into the end of the log. The guide bar is then inserted into the pilot hole. Start your drill slowly at first, then gradually add speed and pressure to cut the tenon to your desired length. We have more instructions, examples, tips, and ticks in the Product Manual. We are no longer sending the 20-page printed product manual, printed ratchet strap clamp plan or the printed center finder plan with each order due to the high cost of printer ink. Please go to the Product Manual Page to download, print, share, or read on-line. Please note that you can use the 90-degree E-Z Tenon Cutter on square wood too! Please be sure to check out the photos that a customer from Finland sent in. Click On A Photo!
|
Click "Add To Cart" to place your order.Regularly $199.00
Includes 90° Cutter, two hex keys for adjusting tenon diameter and removing/replacing blades, and one 3/8" drill bit for drilling pilot holes.
EZ ManualsTOOL SPECIFICATIONSThe Product Manual covers all of the E-Z Log Tools, and provides full specifications on each, along with many photos, instructions, and tips & tricks.
|
|