For complete tool specs, click here to view on-line product manual.

E-Z 45-Degree Log Tenon Cutter

The E-Z Log Tenon Cutters are adjustable, and can be set up to cut 1" up to 3" diameter tenons at the ends of logs and branches.  Use any 1/2" electric drill to make perfect tenons for your log projects.

The pencil-sharpener type log tenon cutters are great for certain projects, however you must buy specific sizes, which can get quite expensive if you need different sized tenons for your project.  I use those pencil cutters if I need a tenon smaller than 1".   I don't normally cut tenons over 3" in diameter.

Another advantage that the E-Z Log Tenon Cutters has over the pencil-sharpener type tenon cutters is that the pilot hole guides the E-Z Log Tenon Cutter to produce a perfect tenon.  The pencil-sharpener type cutters are hard to hold level and steady during the cut and can produce inconsistent and gouged tenons.

Included with each EZ-45:

• E-Z 45 Degree Tenon Cutter
• Two double-sided hardened steel blades.  The 45-Degree cutter uses one blade to cut the tenon.  When one side of the blade gets dull, flip it over to use the other side.  When that side gets dull, use the spare blade that is attached to the arm.  The 90-Degree cutter uses two blades to cut a tenon.  Please see the specs on the 90-Degree here.
• 3/8" drill bit for drilling pilot holes. By drilling a pilot hole into the end of the log to guide the cutter, you are assured of cutting a nice, straight tenon.  Whether you are making a regular straight tenon, or an angled tenon, the cutter will follow.  You won't have to rely on "eye-balling" while cutting, and you won't have gouged our inconsistent tenons, and a solid gluing surface throughout.
• 3/32" Hex Key to adjust tenon size. The cutting arms are attached to the adjustment bar with two screws.  You simply loosen the screws and slide the arms to your desired width.  Please read the Manual for complete instructions on how to get proper diameter, and how to make a set-up block for an easy way to reset the size.
• 3/16" Hex Key to add/remove/replace cutting blades.  Tiny little key to remove/replace the cutting blades.
• We are no longer sending the 20-page printed product manual, the ratchet strap clamp plan, or the center-finder plan because of the high cost of  printer ink.  Please view these documents online, download to your device, or share with others . 
• Click here for the documents page.

Click "Add To Cart" to order

On Sale Now for $149.99​

(Normally $199.99)

Includes 45° Cutter, two hex keys for adjusting tenon diameter and removing/replacing blades, and one 3/8" drill bit for drilling pilot hole.
​

NO INTERNATIONAL ORDERS: 
Please note that due to differences in languages, postal requirements, and cost, we will no longer ship internationally.   
We will only ship to USA addresses.

---

How To Build A Log Headboard Using The E-Z 45° Log Tenon Cutter

The same procedure works for all types of rustic log furniture, railings, tables, chairs, and all sorts of log and branch projects.
With a little imagination, and a great tool like the E-Z Log Tenon Cutter, you can do wonders with logs and branches that would otherwise get thrown away or tossed into the burn pile. I use it to make birch log deer for Christmas too.  It is truly a great tool.
We have lots of spare blades for big projects, spare parts if you break something or loose a screw. All you have to do is call Sandy if you need help.  Click here for info on how to contact me.

---

Click On A Photo!